All RC Cars & Trucks (Except New Release)

Introduction:

The Toyota LC80, also known as the Toyota Land Cruiser 80 series, is a four-wheel drive SUV model produced by Toyota Motor Corporation in the 1990s. First released in 1990, the LC80 quickly became popular worldwide, especially among off-road enthusiasts and outdoor adventurers. Because of its excellent off-road performance, reliability, durability, and comfort, the LC80 series models are one of the preferred models for explorers, off-road enthusiasts, and many special function departments all over the world, as well as one of the most popular off-road vehicles all over the world. Although it has been discontinued for many years, its legendary status and influence remains.

What's in the box:

• 1 x 1:18 FCX18S LC80 S RTR
• 1 x Transmitter
• 1 x Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 7.4V 900mAh Battery
• 1 x USB Battery Charger
• 1 x Product Manual

Need to Complete:

• 4 x AAA Batteries for Transmitter

Specification:

Introduction:

Relive the 1970s classics, reproduce the American hard road style.
In 1969, Chevrolet's first-generation K5 Blazer came out. It was the representative of the famous Chevrolet C/K series and was the most compact full-size SUV on the market at the time. The vehicle is positioned as a full-size sport utility vehicle and is also GM's smallest full-size SUV. It combines Scout's excellent off-road capability with an automatic transmission, which reduces the difficulty of operation and enhances the pleasure of operation. Even people without off-road driving experience can easily drive this car. More people can experience the joy of adventure and long-distance travel to unknown destinations.

What's in the box:

1 x 1:24 FCX24S K5 Blazer S RTR
1 x Transmitter
1 x  Receiver (installed)
1 x 130 Brushed Motor (installed)
1 x 7.4V 380mAh Battery
1 x USB Battery Charger
1 x Product Manual

Needed to Complete:

4 x AAA Batteries for Transmitter

Specification:

The World's First 1/24 Climbing Rock Crawler with Two-speed Transmission - Power Wagon FCX24S

FCX24S meticulously designed by FMS team will redefine the small scale climbing rc car. As the first product of the FCX24S series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. It is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon. Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.

Introduction:

The development of the Chevrolet K10 can be traced back to the early 1960s. During that period, the demand for pickup trucks in the American automotive market began to grow, especially for industrial, agricultural, and outdoor activities, where a robust and durable pickup truck was needed. In this context, Chevrolet, as a brand under General Motors, introduced the first-generation C/K series pickup trucks aimed at meeting these demands, and the Chevrolet K10 was one of them. Over time, the Chevrolet K10 underwent continuous improvements and upgrades to adapt to the ever-changing market demands and technological advancements. It evolved from a simple and practical workhorse to a stylish and multifunctional pickup truck, catering to various needs from utilitarian to luxurious.

What's in the box:

• 1 x 1:18 FCX18S K10 S x MG41-BS Transmitter
• 1 x R4A1 Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 7.4V 900mAh Battery (installed)
• 1 x USB Battery Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual

Need to Complete:

• 4 x AAA Batteries for Transmitter

Specification:

ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS

This 1:10 Atlas 4x4 is designed in the form of an off-road truck racer. The car body is moulded with PC plastic, which is light in weight and has a low center of gravity; the nylon roll cage at the back can protect the car shell during rollovers. The rigid metal frame and four-link suspension system ensure strong climbing ability. The chassis has proven reliability. In both dynamic and static aspects, the real vehicle has been painstakingly restored.

Background

Land Rover has earned its place as a global leader in off-road vehicles, blending unmatched capability with innovative engineering. Iconic models like the Defender, Range Rover, and Discovery have proven their strength in extreme conditions and legendary events such as the Camel Trophy, cementing Land Rover’s reputation for endurance, resilience, and technology.

Defender
Since its debut in 1948, the Defender has become a symbol of rugged reliability. Trusted by military units, rescue teams, and off-road adventurers alike, its high ground clearance and durable design made it a standout in the Camel Trophy—where it came to embody resilience and toughness under the harshest conditions.

Range Rover
First launched in 1970, the Range Rover set the standard for combining luxury with proven off-road performance. Its presence in the Camel Trophy demonstrated that capability and refinement can go hand-in-hand, making it the ultimate choice for drivers seeking both prestige and adventure.

Discovery
Introduced in 1989, the Discovery struck a balance between off-road capability, everyday comfort, and family practicality. Designed for versatility, it excelled on rugged terrain while offering comfort and convenience for passengers—proving itself as a true adventure-ready SUV.

Land Rover Legacy
Land Rover is more than a vehicle manufacturer—it is a global symbol of exploration and adventure. The brand’s deep connection to the Camel Trophy helped define its identity, inspiring generations of enthusiasts to embrace discovery, endurance, and freedom. With a legacy built on toughness, innovation, and iconic design, Land Rover continues to shape the future of off-road driving.

Introduction

FMS proudly introduces the 1/10 scale Land Rover Camel Trophy Series, featuring officially licensed models of the Defender, Range Rover, and Discovery. Built on the proven FCX10 chassis, these RC crawlers deliver trail-tested durability and performance worthy of the Land Rover name.

Each model is packed with scale-accurate details, including side mirrors, snorkels, working spotlights, and a fully detailed interior. The durable PC soft plastic body comes with pre-installed headlights, reverse lights, and mudguards, ensuring both realism and rugged protection.

The FCX10 chassis is engineered for stability and control, with a front-center motor layout, four-link suspension, and straight axles at both the front and rear to maximize traction. A low-mounted motor and transmission unit lowers the center of gravity, helping reduce rollovers and keep the vehicle planted on challenging terrain.

Ready for adventure, the FMS Land Rover Camel Trophy Series combines authentic design with practical trail performance, capturing the legendary spirit of Land Rover in every drive.

What’s in the Box:

• 1 × FCX10 Land Rover RS
• 1 × MG6 6-Channel Transmitter
• 1 × R6D-ESC-BS Receiver (pre-installed)
• 1 × 550 Brushed Motor 32T (pre-installed)
• 1 × Product Manual

Needed to Complete:

• 4 × AA Batteries for the transmitter
• Battery & Charger for the kit (Recommended: 2S or 3S 5000mAh with XT60 plug)

Note to Buyer:

• This product is recommended for ages 14 and up. Children under 14 should use it only under adult supervision.
• Receivers may vary between old and new versions. Old version: Turn signals remain always on. New version: Turn signals can be switched on or off by the user.

Specification:

Adventurer's Staple, Off-Road Legends - 1:12 Land Rover

The Land Rover Series 2 is an iconic off-road vehicle that well represents the adventurous spirit of the Land Rover brand. It combines outstanding durability with outstanding versatility, making it the ideal companion for outdoor enthusiasts and adventure seekers.

The new Land Rover Series II launched by FMS inherits the essence of real cars in terms of highly realistic appearance, comfortable fully simulated interior, durable chassis and powerful power system.

Whether traversing rugged mountains, traversing muddy trails, or crossing rivers, FMS-Land Rover Series 2 can bring an exciting and reliable handling experience, embodying the spirit of pioneering adventure, allowing players to create unforgettable memories.

What's in the box:

• 1 x 1:12 Land Rover Series II RTR
• 1 x 2.4G Transmitter + 2 in1 ESC & Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 3 x 3Y 9g Digital Servo (installed)
• 1 x 2S Lipo 7.4V 380mAh Battery
• 1 x USB Battery Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual
• 1 x Bind Connector
  
  

Need to Complete:

4 x AAA Batteries for Transmitter

Specification:

• Length: 270mm
  
• Width: 135mm
• Height: 149mm
• Wheelbase: 169mm
• Tire F/R : Φ 54.8*19.5mm
• Minimum Ground Clearance: 31mm
• Approach Angle: 57°
• Departure Angle: 42 °
• Motor: 180 Brushed motor
• Battery: 2S Lipo 7.4V 380mAh x1
• Remote control distance: 30m
• Approx. operating duration time: 20mins
• Remote control: MG41-BS transmitter, R4A1 receiver with ESC group control board

1:10 Mashigan - BORN ADVENTURER

For adventurers, the road ahead is always rough and full of thorns, but whether there is a road or no road, this 1:10 Mashigan's 1.9 inch climbing tires can give you confidence, and meanwhile, the four-link suspension system gives you a guarantee of strong power, the metal trapezoidal beams provide you with a solid supportive structure. Even with a hard plastic car shell with a complete interior, Mashigan can easily overcome extreme road conditions. The real first-generation model uses leaf spring suspension, and adventurers will not ignore the history, the chassis can be installed with leaf spring suspension (sold separately) to restore the style of the first generation model. Pursuing the needs of climbing performance and restoration seems to be impossible, but through the compatible design of the chassis and the replacement of a few accessories, it can show a completely different shape. Two postures, and double the fun.

The exquisite interior and four-door full-opening design double the level of detail of this hard-shell RC model, which can be viewed statically or operated indoors. With climbing-level sturdy chassis and suspension system, FMS 1:10 Mashigan make it cool to go wild!

What's in the box:

1 x 1:10 Mashigan RS
1 x 2.4GHz Radio
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 550 Brushed Motor (installed)
1 x 9g Plastic Digital Servo (installed)
1 x 15kg Metal Digital Servo(installed)
1 x Product Manual

Need to Complete:

• 4 x AA Batteries for Radio
• Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)

Specification:

• Radio Control: 160 x 193 x 97mm, 221g (Battery not Included)
• Model Vehicle: 546 x 274 x 282mm, 4kg (Battery not Included)
• Tire: D:115mm, W:30mm
• Wheel Base: 339mm
• Ground Clearance: 82mm
• Approach Angle: 68°
• Departure Angle: 47°
• Driving Speed: up to 15km/h
• Remote Distance: 80m
• Play Time: 20 minute
  
  

1:12 TOYOTA FJ45 Pickup Truck

To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.

The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.

The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.

What's in the box:

• 1 x 1:12 TOYOTA FJ45 RTR
• 1 x 2.4G Transmitter
• 1 x 2-in-1 Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 9g Plastic Digital Servo (installed)
• 1 x 2S 7.4V 380mAh Battery with PCM
• 1 x USB Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual

Need to Complete:

4 x AAA Batteries for Transmitter

Specification:

• Length: 345mm
• Width: 127mm
• Height: 124mm
• Wheel base: 270mm
• Tire: D:60mm , W:15mm
• Ground clearance: 29mm
• Approach angle: 58°
• Departure angle: 29.9°
• The Highest Driving speed: 8km/h
• Remote control distance: 30m
• Play time: 20 minute

The "Steel Chariot" of a Passionate and Tough Warrior

The FMS HUMMER H1 is coming strong! Unlike the common scale crawlers on the market, FMS HUMMER H1 is a very high-detail RC crawler that comes complete with a full scale chassis structure and drivetrain system, and an exquisite scale interior with full door function.
Power comes from a 370 motor. Two servos respectively control both the switch between high and low speed gears and the operation of the transfer case, thus switching between rear drive and four-wheel drive. Both the front and rear differentials also have a differential lock function, each driven by a servo which can be locked by remote control. Four metal drive shafts transmit power from the differential to the reduction gear assembly, commonly known as a "portal axle". The HUMMER H1 also has a full metal gear-set and 47 ball-bearings. We have included the rear wheel steering as an additional hidden function, so you now have a total of 4 steering modes! The extra mode, which can reduce the steering radius by 50%, is ideal in confined spaces.
The HUMMER H1 uses a front mid-engine layout just like the real vehicle, and the hood is designed to be flipped forward. Four doors can all be opened, and the smart door lock mechanism is a separate unit. The cabin also features a highly detailed dashboard and moving steering wheel that turns with the main steering. The roof is removable and the windshield can be lowered forward. The body of the Hummer is mainly made of aluminum alloy and fiberglass, and the fixing method is riveting. A 2.4G 7CH digital proportional radio system, a receiver/ ESC/ light control three-in-one unit, 7 servos（including 13g metal gear servo x 2pcs)
The FMS HUMMER H1 is presented as it should be – a no compromise “work of art” scale vehicle that is sure to be one for collectors and enthusiasts alike!  

What's in Box

1 x 1:12 HUMMER H1 RS
1 x 2.4GHz Transmitter
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 370 Brushed Motor (installed)
5 x 9g Plastic Digital Servo (installed)
2 x 13g Metal Digital Servo(installed)
1 x Hex Wrench Socket
1 x Product Manual

Need to Complete

4 x AAA Batteries for Transmitter
Battery for Kit (Recommended 2S 7.4V 2000mAh 20C XT30 plug; Battery compartment size: L 90mm x W 35mm x H 20mm)

Specification

Length: 408mm
Width: 222mm
Height: 162mm
Wheelbase: 272mm
Tire F/R: Φ 78 × 25mm
Approach Angle: 52°
Departure Angle: 39°
Speed: the highest fast gear is 8km/h, the highest slow gear is 5km/h
Minimum Ground Clearance: 40mm
Motor: 370 Brushed motor
Remote control distance: 30m
Approx. operating duration time: 20mins
Remote control: G7 + R7A Transmitter receiver set