TOYOTA Collection

Introduction:

Authorized by Toyota, this 1/10 Land Cruiser 80 from FMS Model adopts the FCX10 simulation crawler chassis, which faithfully restores the off-road performance of the original car.

In terms of appearance, FMS maintains a consistently high standard. To ensure durability, the car body is made of PC material. The model is equipped with mirrors and waders. Through the transparent windows, you can see a high degree of simulation, including the detailed dashboard and cockpit interior. The roof features a luggage rack and four off-road lights, and a climbing ladder is installed at the rear.

The vehicle comes pre-installed with headlights, front, side, and rear turn signals, reverse lights, and other lighting components. The car shell uses a magnetic interface to draw power from the chassis, allowing the lights of the entire vehicle to be activated with a single button on the remote control. Additionally, pre-installed fenders help prevent mud from spilling onto the body and chassis.

FMS has also co-branded with OVRmag.com to launch a fully licensed edition. This edition adds KC vintage and modern-style lampshades, and comes equipped with HDR wheels and TOYO Open Country A/T III tires.

The chassis adopts a mainstream mid-front power layout with a four-link suspension. To better replicate the real car, straight axles have been fitted, but the larger tires still provide sufficient ground clearance and climbing ability. The mid-front motor and transmission, as an integral unit, lower the vehicle’s center of gravity compared to similar products, reducing the rolling center and the likelihood of rollovers. Meanwhile, a metal-gear waterproof servo is placed on the side of the battery compartment to handle high and low-speed switching.

To maximize performance, FMS uses a high-class brushless power system. Compared to brushed combos, the 50A independent ESC (6V/3A BEC output) and 3541 outer-rotor brushless motor provide precise linear control, allowing the vehicle to crawl at a snail-like uniform speed. The outer-rotor structure also has excellent dynamic balancing characteristics, which reduces the end effect of the stator coils and improves running performance.

For daily maintenance convenience, FMS has also made thoughtful design choices. The battery compartment can be flipped back or quickly released. All electronic components are concentrated in the middle of the chassis, making it easy to maintain, remove, or replace them. Thanks to FMS’s R&D capabilities, a patented knob-type quick-release structure has been innovatively designed. At the same time, the power and signal cables of the lights are perfectly integrated with the magnetic module.

Except for an adventurous spirit, you don’t need to prepare anything else—FMS takes care of the off-road journey for you!

What's in the box:

1 x FMS 1:10 FCX10 OVR LC80 RS Brushless
1 x Transmitter
1 x Receiver (Pre-installed)
1 x Motor (Pre-installed)
1 x Product Manual 

Needed to Complete:

4 x AA Batteries for Transmitter 
RS Version Requires Battery & Charger Kit (Recommended 2S 7.4V 4400mAH 30C Lipo Battery with XT60 Connector - SKU: C1542)  

Specification:

Introduction

Scale Authenticity Meets Off-Road Adventure

The FMS Tacoma brings the rugged spirit of Toyota’s legendary pickup into the world of RC. This officially licensed 1:24-scale crawler blends true-to-scale design with serious off-road performance in a compact, go-anywhere crawler.

From the ABS hard body to the molded grille, mirrors, door handles, and bumpers—every detail is captured. It’s available in three factory-matched colors—Gray, Red, and Blue.

Built on the next-generation FCX24M chassis, the Tacoma features a 153mm (6.02") extended wheelbase, ladder-frame construction, and solid axles for increased durability and torque control. The all-new off-road tires deliver excellent grip and ground clearance, giving this micro-crawler big-truck performance.

Powered by a high-torque 050 motor and equipped with a two-speed transmission, the Tacoma is ready to crawl slowly or hit top speed on demand. The included 2S 380 mAh LiPo battery delivers up to 30 minutes of runtime per charge.

Whether you’re building micro-terrain indoors or taking on backyard trails, the FMS Tacoma is ready for whatever comes next. It’s not just a model—it’s an RC tribute to one of the most dependable off-road trucks ever built.

What’s in the Box:

• 1 × 1:24 FCX24M Toyota Tacoma RTR (with installed electronics)
• 1 × 2.4GHz G3 Transmitter
• 1 × R3A Receiver (pre-installed)
• 1 × 050 Brushed Motor (pre-installed)
• 1 × Product Manual

Needed to Complete:

• 4 × AAA Batteries for the Transmitter
  

Specification:

Introduction:

Introducing the LC80, the latest addition to the FCX10 Series. This off-roader comes equipped with the FCX10 realistic crawling chassis, two-speed transmission, and a powerful 550 brushed motor for tackling tough terrains. For the ultimate in realism, it features a durable PC plastic body, detailed interiors, and straight axles. The LC80 offers great performance and authenticity, making it the ideal 1/10 scale RC car for off-road adventures.

What's in the box:

1 x 1:10 FCX10 LC80 RS
1 x 2.4GHz MG6 Radio
1 x 2-in-1 R6D Receiver / 60A ESC (installed)
1 x Product Manual

Needed to Complete:

4 x AA Batteries for Transmitter
Battery & Charger for Kit (Recommended 2S or 3S 5000mAh XT60 plug x1)

Specification:

Introduction:

The Toyota LC80, also known as the Toyota Land Cruiser 80 series, is a four-wheel drive SUV model produced by Toyota Motor Corporation in the 1990s. First released in 1990, the LC80 quickly became popular worldwide, especially among off-road enthusiasts and outdoor adventurers. Because of its excellent off-road performance, reliability, durability, and comfort, the LC80 series models are one of the preferred models for explorers, off-road enthusiasts, and many special function departments all over the world, as well as one of the most popular off-road vehicles all over the world. Although it has been discontinued for many years, its legendary status and influence remains.

What's in the box:

• 1 x 1:18 FCX18S LC80 S RTR
• 1 x Transmitter
• 1 x Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 7.4V 900mAh Battery
• 1 x USB Battery Charger
• 1 x Product Manual

Need to Complete:

• 4 x AAA Batteries for Transmitter

Specification:

1:12 TOYOTA FJ45 Pickup Truck

To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.

The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.

The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.

What's in the box:

• 1 x 1:12 TOYOTA FJ45 RTR
• 1 x 2.4G Transmitter
• 1 x 2-in-1 Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 9g Plastic Digital Servo (installed)
• 1 x 2S 7.4V 380mAh Battery with PCM
• 1 x USB Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual

Need to Complete:

4 x AAA Batteries for Transmitter

Specification:

• Length: 345mm
• Width: 127mm
• Height: 124mm
• Wheel base: 270mm
• Tire: D:60mm , W:15mm
• Ground clearance: 29mm
• Approach angle: 58°
• Departure angle: 29.9°
• The Highest Driving speed: 8km/h
• Remote control distance: 30m
• Play time: 20 minute