VIP Adventurer
FMS
Use the filter menu to find your desired model!
121 - 144 of 4231 products
-
US only Save $12.98
-
-
-
-
-
-
-
-
-
-
-
-
Common Parts - 40A ESC With 200mm Input Cable, 3.5mm Motor Connector, XT60 In stock$29.99 USD$29.99 USD -
-
-
Motor Mount For 1200mm CJ6 V1&V2, 1100mm PC-21, 1700mm PA-18, 1800mm Ranger, 2500mm ASW-17, 1500mm Maule In stock$11.99 USD$11.99 USD -
-
-
Upgrade Parts - 1:24 METAL Y CONNECTOR FRONT/REAR AXLE CONNECTING ROD In stock$16.99 USD$16.99 USD -
-
FMS 1:12 TOYOTA FJ45 Pickup Truck RTR
Description
1:12 TOYOTA FJ45 Pickup Truck
To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.
The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.
The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.
What's in the box:
- 1 x 1:12 TOYOTA FJ45 RTR
- 1 x 2.4G Transmitter
- 1 x 2-in-1 Receiver (installed)
- 1 x 180 Brushed Motor (installed)
- 1 x 9g Plastic Digital Servo (installed)
- 1 x 2S 7.4V 380mAh Battery with PCM
- 1 x USB Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
Need to Complete:
4 x AAA Batteries for Transmitter
Specification:
- Length: 345mm
- Width: 127mm
- Height: 124mm
- Wheel base: 270mm
- Tire: D:60mm , W:15mm
- Ground clearance: 29mm
- Approach angle: 58°
- Departure angle: 29.9°
- The Highest Driving speed: 8km/h
- Remote control distance: 30m
- Play time: 20 minute
1:18/1:24 LUGGAGE CARRIER SET
1700mm F7F Propeller 14*8
Description
FMS 2500mm ASW-17 EP Glider PNP
Description
FMS is proud to announce the brand-new 2500mm ASW-17!
World champion pilot Daniel Aeberli joins model aircraft manufacturer FMS in creating the world's first scale performance foam glider- the ASW-17. True to the FMS spirit, no detail was overlooked in the design of the ASW-17. The FMS engineers made 4 expensive tooling adjustments just to micro-adjust the airfoil for perfect efficiency.
The wing, vertical and horizontal stabilizers are designed with a snap-together structure. With a simple snap, the surfaces attach to the fuselage with pinpoint precision- no screws or glue necessary! Build the aircraft in as little as 3 minutes!
Like the 3000mm Fox, the ASW-17 has a pre-installed carbon fiber spar that ensures wing rigidity in high-G maneuvers.
To achieve the same dihedral as the real aircraft, the ASW-17 was designed with a specialized CNC aluminum spar joiner- allowing the aircraft to maintain its wing geometry during demanding flight routines.
Performance-wise, a high-quality Hobbywing 40A ESC paired with a Predator 3541-750KV motor provides ample power with a 4S pack to perform most aerobatic maneuvers.
If efficiency, stability and aerobatic capabilities are what you seek in a glider, look no further than the FMS 2500mm ASW-17!
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
| Specification | |
| Wingspan | 2500mm / 98.4 in |
| Overall Length | 1390mm / 54.7 in |
| Flying Weight | Around 2350g |
| Motor Size | 3541 KV750 |
| ESC | 40A ESC (with brake function) |
| Servo | 17gX4pcs |
| Servo | 9gX2pcs |
| Radio | 6CH Channel |
| CG (center of gravity) | 70-80mm |
| Prop Size | 13.5*6，2 blades |
| Recommended Battery | 14.8V 2200mAh-2600mAh 35c |
| Battery Connector | XT60 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | No |
| Approx. Flying Duration | 10minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Intermediate |
| Assembly Time | 5minutes |
| Wing Load | 45.7g/dm² (0.09oz/in²) |
| Wing Area | 50.3 dm² (779.5 sq.in) |
64mm Futura Steering Wire
1220mm Ranger V2 Battery Cover (Red/Green/Yellow)
Description
1220mm Ranger V1 (SKU=FMSRN106) is the same item on Ranger V2 (SKU=FMSES104YL)
Propeller 14*8
Description
FMS 1:12 2006 Hummer H1 Alpha RTR
Description
The "Steel Chariot" of a Passionate and Tough Warrior
The FMS HUMMER H1 is coming strong! Unlike the common scale crawlers on the market, FMS HUMMER H1 is a very high-detail RC crawler that comes complete with a full scale chassis structure and drivetrain system, and an exquisite scale interior with full door function.
Power comes from a 370 motor. Two servos respectively control both the switch between high and low speed gears and the operation of the transfer case, thus switching between rear drive and four-wheel drive. Both the front and rear differentials also have a differential lock function, each driven by a servo which can be locked by remote control. Four metal drive shafts transmit power from the differential to the reduction gear assembly, commonly known as a "portal axle". The HUMMER H1 also has a full metal gear-set and 47 ball-bearings. We have included the rear wheel steering as an additional hidden function, so you now have a total of 4 steering modes! The extra mode, which can reduce the steering radius by 50%, is ideal in confined spaces.
The HUMMER H1 uses a front mid-engine layout just like the real vehicle, and the hood is designed to be flipped forward. Four doors can all be opened, and the smart door lock mechanism is a separate unit. The cabin also features a highly detailed dashboard and moving steering wheel that turns with the main steering. The roof is removable and the windshield can be lowered forward. The body of the Hummer is mainly made of aluminum alloy and fiberglass, and the fixing method is riveting. A 2.4G 7CH digital proportional radio system, a receiver/ ESC/ light control three-in-one unit, 7 servos（including 13g metal gear servo x 2pcs)
The FMS HUMMER H1 is presented as it should be – a no compromise “work of art” scale vehicle that is sure to be one for collectors and enthusiasts alike!
What's in Box
1 x 1:12 HUMMER H1 RS
1 x 2.4GHz Transmitter
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 370 Brushed Motor (installed)
5 x 9g Plastic Digital Servo (installed)
2 x 13g Metal Digital Servo(installed)
1 x Hex Wrench Socket
1 x Product Manual
Need to Complete
4 x AAA Batteries for Transmitter
Battery for Kit (Recommended 2S 7.4V 2000mAh 20C XT30 plug; Battery compartment size: L 90mm x W 35mm x H 20mm)
Specification
Length: 408mm
Width: 222mm
Height: 162mm
Wheelbase: 272mm
Tire F/R: Φ 78 × 25mm
Approach Angle: 52°
Departure Angle: 39°
Speed: the highest fast gear is 8km/h, the highest slow gear is 5km/h
Minimum Ground Clearance: 40mm
Motor: 370 Brushed motor
Remote control distance: 30m
Approx. operating duration time: 20mins
Remote control: G7 + R7A Transmitter receiver set
FMS LIPO BATTERY 7.4V 900mAh 25C XT30
FCX18 TRAILER HOOK
Description
For FCX18 Hummer EV, FCX18 Land Cruiser 80, FCX18 K10, FCX18 LC80 Brushless
1:18/1:24 LIFTING JACK (4PCS)
Common Parts - 40A ESC With 200mm Input Cable, 3.5mm Motor Connector, XT60
Description
?For?1020mm F3A, 1100mm MXS V2, 1400mm Sky Trainer 182, 1400mm Kingfisher, 1400mm J-3 V4, 1500mm Maule, 1200mm CJ6 V2, 1100mm A6M5 Zero, 1100mm Typhoon, 1100mm PC-21, 1300mm PA-18, 64mm Futura, 1500mm Cessna 1821500mm Cessna 182.
Upgrade Parts - FCX24M Differential Set
FCX24M Gear for Axle
Description
For FCX24M Discovery/Range Rover/Defender 110
¢Ù Front Axle Assembly: C3416, MUST paired with?FCX24M Front Axle Plastic Parts V2 (SKU=C3413V2)?
¢Ú Rear Axle Assembly: C3416, MUST paired with FCX24M Rear Axle Plastic Parts V2 (SKU=C3414V2)
For Defender 90
¢Ù Front axle: C3416, MUST paired with paired with FCX24M Front Axle Plastic Parts V2 (SKU=C3413V2)?
Motor Mount For 1200mm CJ6 V1&V2, 1100mm PC-21, 1700mm PA-18, 1800mm Ranger, 2500mm ASW-17, 1500mm Maule
Description
For 1200mm CJ6 V1&V2, 1100mm PC-21, 1700mm PA-18, 1800mm Ranger, 2500mm ASW-17, 1500mm Maule, 1500mm Cessna 182, 1700mm PA-18 V2
Battery 7.4V 850mah 25C XT30 Plug
Description
Important: This battery features an XT30 plug (not JST). Please confirm compatibility with your aircraft before ordering. Adapters are available here if needed: RC Battery Adapter.
For 850mm Ranger, 800mm Beaver
This battery is compatible with the Charger, SKU: FMSCHR001
Spinner for 1450mm P-51D Red Tail
Upgrade Parts - 1:24 METAL Y CONNECTOR FRONT/REAR AXLE CONNECTING ROD
Description
For 1:24 Smasher, Power Wagon, K5 Blazer, Lemur, Unimog 421, FCX24 K5 PRO, FCX24 K5 Black Brushless, FCX24 Power Wagon Brushless
